HEBEL High Build Render

Supplied as a dry powder form requiring the addition of fresh potable water on site. For application over Hebel Power Panel & AAC blocks in CSR Hebel – Dulux AcraTex approved coating systems.

  • Polymer-Fibre reinforced
  • Ready to use after adding water- No wet polymer addition
  • Easy of application
  • Increased adhesion, Impact and Crack resistence
  • Consistent technical properties
  • Fast, effecient process

REFER TO THE BAG LABEL FOR DETAILED INFORMATION in conjunction with DULUX AcraTex Application Manual & Duspec data sheet for detailed substrate preperation & application instructions.

DULUX AcraTex Hebel High Build Render is formulated for applications from 4-6 mm in single applications. It can be applied up to 12mm thick in multiple applications. It is engineered for application onto clean sound HEBEL AAC Power Panels and Blocks.

Typical Properties and application data

Application GuideHebel High Build Render is applied by Plastering Technique (Hawk and Trowel) method or via Render Pump in single application from 4-6mm or up to 10mm thick in multiple applications.Thin bed applications requires the addition of 500/4 AcraBond to fresh clean water. REFER TO THE BAG LABEL FOR DETAILED INFORMATION in conjunction with DULUX AcraTex Application Manual & Duspec data sheet for detailed substrate preperation & application instructions.
Technology TypePolymer modified cementicious render
Volume solids100%
Number of coats1-2
WFT (Micron per coat)3000-4000
DFT (Micron per coat)3000-4000
Spread Rate Sqm/L Per coat0.2
Mixing Ratio5 litres of water per 20kg
Pot Life1 hour
Touch Dry6-10hours
ToxicityLead free. Forms a non toxic film. Conforms to AS1647.3
ApplicationTrowel
Clean upWater
Recoat Time (25°C,50%R.H.)7 days
Full Cure (25°C,50%R.H.)7 days
Shelf Life12 months maximium
Sizes20kg
NotesSpread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance